Home  |   Cart  |   Q & A  |   Using Your Hammock  |   Hammock Installation  |   About Us

Installing Your


Please Read the Following Instructions
and Installation Information Carefully
So Your Baby is Always Kept Safe

Hardware Included

  • 1 Welded steel ring (attached): Weight bearing to 200 lb
  • 1 Extension Spring: Maximum working load 85 lb
  • 1 Eye Screw: 3/8” x 3.75”: Weight bearing to 120 lb
  • 1 Safety Spring Snap Link ¼” opening: Weight bearing to 100 lb
  • 1 *Chain link: 1” x 12”: Weight bearing to 340 lb
  • *Use your chain link to adjust the height of your Hammock.

To install, you will need:

  • Eye Screw(s) (1 included with each Special Delivery Baby Hammock) Purchase additional eye screws at your local hardware store, for enjoying multiple locations.
  • Power drill with 3/16 inch drill bit
  • Tape measure
  • We highly recommend an electronic stud finder to insure installation in proper structural timbers.

Steps for proper installation:

  • Determine room and area that will be most convenient
  • In homes with drywall, use a stud finder or professional to determine the exact location of the ceiling joist. If in doubt, seek professional assistance!
  • Pre-drill a 3/16-inch pilot hole, 1.5 to 2 inches deep. Insert eye lag and turn until flush with the support surface. Placing a screwdriver or similar object through the eye of the eye lag is recommended for extra leverage when screwing it in.
  • Test with weight in excess of that of a child, and make sure the eye lag is screwed straight into joist.
  • Attach the Special Delivery Baby Hammock using the Snap link & chain to obtain the desired length. ENJOY!


Choose the perfect room or door way to hang your Hammock. Insure that the Hammock has a clear space where it is hung, so that it will not bang against any objects, walls or doors.

Helps your baby get the rest they need
while transitioning...  from Womb to World